Technolec

AWK-1161C SERIES

Industrial Wi-Fi 6 (802.11ax) wireless client with 1 10/100/1000BaseT(X) port, IP30, US band, -25 to 60°C operating temperature
awk-1161c-series
IEEE 802.11ax Wi-Fi 6 client
Selectable dual-band Wi-Fi with data rates up to 1,201 Mbps
AP-agnostic millisecond-level Client-based Turbo Roaming


The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
Compact size for easy installation
Easy network setup with Network Address Translation (NAT)
Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
Integrated antenna isolation to protect against external electrical interference
Security features referencing IEC 62443-4-2 Security Level 2

WLAN Interface

  • WLAN Standards: 2.4 GHz: 802.11ax with 1024 QAM support, 20/40 MHz5 GHz: 802.11ax with 1024 QAM support, 20/40/80 MHzWMM for QoS
  • Frequency Band for US (20 MHz operating channels): DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  • Frequency Band for US (20 MHz operating channels): DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  • Frequency Band for US (20 MHz operating channels): 5.260 to 5.320 GHz (4 channels)
  • Frequency Band for US (20 MHz operating channels): DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  • Wireless Security: WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2/WPA3-Personal
  • Wireless Roaming: 802.11r
  • Wireless Roaming: The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
  • Wireless Roaming: 802.11r
  • Transmission Rate: 2.4 GHz:Up to 573.5 Mbps5 GHz:Up to 1,201 Mbps
  • Transmitter Power for 802.11a (Dual Chain): 21±1.5 dBm @ 6 Mbps 21±1.5 dBm @ 54 Mbps
  • Transmitter Power for 802.11n (5 GHz, Dual Chain): 26±1.5 dBm @ MCS0 20 MHz 22±1.5 dBm @ MCS7 20 MHz 26±1.5 dBm @ MCS0 40 MHz 22±1.5 dBm @ MCS7 40 MHz
  • Transmitter Power for 802.11ac (Dual Chain): 21±1.5 dBm @ MCS0 20 MHz 21±1.5 dBm @ MCS8 20 MHz 21±1.5 dBm @ MCS0 40 MHz 21±1.5 dBm @ MCS9 40 MHz 21±1.5 dBm @ MCS0 80 MHz 21±1.5 dBm @ MCS9 80 MHz
  • Transmitter Power for 802.11ax (Dual Chain): 21±1.5 dBm @ MCS0 20 MHz 20±1.5 dBm @ MCS11 20 MHz 21±1.5 dBm @ MCS0 40 MHz 20±1,5 dBm @ MCS11 40 MHz 21±1.5 dBm @ MCS0 80 MHz 20±1.5 dBm @ MCS11 80 MHz
  • Transmitter Power for 802.11b (Dual Chain): 21±1.5 dBm @ 1 Mbps 21±1.5 dBm @ 11 Mbps
  • Transmitter Power for 802.11g (Dual Chain): 21±1.5 dBm @ 6 Mbps 21±1.5 dBm @ 54 Mbps
  • Transmitter Power for 802.11n (2.4 GHz, Dual Chain): 26±1.5 dBm @ MCS0 20 MHz 24±1.5 dBm @ MCS7 20 MHz 26±1.5 dBm @ MCS0 40 MHz 24±1.5 dBm @ MCS7 40 MHz
  • Transmitter Power for 802.11ac (2.4 GHz, Dual Chain): 26±1.5 dBm @ MCS0 20 MHz 24±1.5 dBm @ MCS8 20 MHz 26±1.5 dBm @ MCS0 40 MHz 23±1.5 dBm @ MCS9 40 MHz
  • Transmitter Power for 802.11ax (2.4 GHz, Dual Chain): 26±1.5 dBm @ MCS0 20 MHz 21±1.5 dBm @ MCS11 20 MHz 26±1.5 dBm @ MCS0 40 MHz 21±1.5 dBm @ MCS11 40 MHz
  • Receiver Sensitivity for 802.11a: Typ. -88 dBm @ 6 Mbps Typ. -72 dBm @ 54 Mbps
  • Receiver Sensitivity for 802.11n (5 GHz): Typ. -88 dBm @ MCS0 20 MHz Typ. -68 dBm @ MCS7 20 MHz Typ. -84 dBm @ MCS0 40 MHz Typ. -66 dBm @ MCS7 40 MHz
  • Receiver Sensitivity for 802.11ac (5 GHz): Typ. -88 dBm @ MCS0 20 MHz Typ. -65 dBm @ MCS8 20 MHz Typ. -85 dBm @ MCS0 40 MHz Typ. -60 dBm @ MCS9 40 MHz Typ. -81 dBm @ MCS0 80 MHz Typ. -55 dBm @ MCS9 80 MHz
  • Receiver Sensitivity for 802.11ax (5 GHz): Typ. -88 dBm @ MCS0 20 MHz Typ. -59 dBm @ MCS11 20 MHz Typ. -85 dBm @ MCS0 40 MHz Typ. -56 dBm @ MCS11 40 MHz Typ. -81 dBm @ MCS0 80 MHz Typ. -52 dBm @ MCS11 80 MHz
  • Receiver Sensitivity for 802.11b: Typ. -96 dBm @ 1 Mbps Typ. -88 dBm @ 11 Mbps
  • Receiver Sensitivity for 802.11g: Typ. -90 dBm @ 6 Mbps Typ. -74 dBm @ 54 Mbps
  • Receiver Sensitivity for 802.11n (2.4 GHz): Typ. -90 dBm @ MCS0 20 MHz Typ. -70 dBm @ MCS7 20 MHz Typ. -87 dBm @ MCS0 40 MHz Typ. -69 dBm @ MCS7 40 MHz
  • Receiver Sensitivity for 802.11ac (2.4 GHz): Typ. -90 dBm @ MCS0 20 MHz Typ. -66 dBm @ MCS6 20 MHz Typ. -87 dBm @ MCS0 40 MHz Typ. -63 dBm @ MCS9 40 MHz
  • Receiver Sensitivity for 802.11ax (2.4 GHz): Typ. -90 dBm @ MCS0 20 MHz Typ. -59 dBm @ MCS11 20 MHz Typ. -87 dBm @ MCS0 40 MHz Typ. -56 dBm @ MCS11 40 MHz
  • WLAN Operation Mode: Client Client-Router Slave Sniffer
  • Antenna: External, 2/2 dBi Omni-directional
  • Antenna Connectors: 2 RP-SMA female
  • Transmitter Power for 802.11a (5 GHz, Dual Chain): When the ambient operating temperature exceeds 65°C, the maximum transmitter power should be set to 24 dBm to prevent performance degradation.
  • Transmitter Power for 802.11a (5 GHz, Dual Chain): When the ambient operating temperature exceeds 65°C, the maximum transmitter power should be set to 24 dBm to prevent performance degradation.
  • Transmitter Power for 802.11a (5 GHz, Dual Chain): ±1.5 dBm @ 6 Mbps 23.5
  • Transmitter Power for 802.11a (5 GHz, Dual Chain): When the ambient operating temperature exceeds 65°C, the maximum transmitter power should be set to 24 dBm to prevent performance degradation.
  • Transmitter Power for 802.11a (5 GHz, Dual Chain): ±1.5 dBm @ 54 Mbps
  • Transmitter Power for 802.11ac (5 GHz, Dual Chain): 26±1.5 dBm @ MCS0 20 MHz 22±1.5 dBm @ MCS8 20 MHz 25±1.5 dBm @ MCS0 40 MHz 21±1.5 dBm @ MCS9 40 MHz 25±1.5 dBm @ MCS0 80 MHz 21±1.5 dBm @ MCS9 80 MHz
  • Transmitter Power for 802.11ax (5 GHz, Dual Chain): 26±1.5 dBm @ MCS0 20 MHz 20±1.5 dBm @ MCS11 20 MHz 25±1.5 dBm @ MCS0 40 MHz 20±1.5 dBm @ MCS11 40 MHz 25±1.5 dBm @ MCS0 80 MHz 20±1.5 dBm @ MCS11 80 MHz
  • Transmitter Power for 802.11b (2.4 GHz, Dual Chain): When the ambient operating temperature exceeds 70°C, the maximum transmitter power should be set to 24 dBm to prevent performance degradation.
  • Transmitter Power for 802.11b (2.4 GHz, Dual Chain): When the ambient operating temperature exceeds 70°C, the maximum transmitter power should be set to 24 dBm to prevent performance degradation.
  • Transmitter Power for 802.11b (2.4 GHz, Dual Chain): ±1.5 dBm @ 1 Mbps 29
  • Transmitter Power for 802.11b (2.4 GHz, Dual Chain): When the ambient operating temperature exceeds 70°C, the maximum transmitter power should be set to 24 dBm to prevent performance degradation.
  • Transmitter Power for 802.11b (2.4 GHz, Dual Chain): ±1.5 dBm @ 11 Mbps
  • Transmitter Power for 802.11g (2.4 GHz, Dual Chain): 27±1.5 dBm @ 6 Mbps 25±1.5 dBm @ 54 Mbps

Ethernet Interface

  • Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3az for Energy-Efficient Ethernet IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication
  • 10/100/1000BaseT(X) Ports (RJ45 connector): 1

Ethernet Software Features

  • Management: DHCP Server DHCP Client DNS HTTP IPv4/IPv6 LLDP SMTP SNMPv1/v2c/v3 Syslog TCP/IP Telnet UDP VLAN MXconfig MXview One MXview Wireless Turbo Roaming Analyzer
  • Routing: Port forwarding Static Route NAT
  • Security: HTTPS/SSL RADIUS SSH Certificate Management
  • Time Management: SNTP Client

Firewall

  • Filter: ICMP MAC address IP protocol Port-based Wi-Fi ACL

Serial Interface

  • Console Port: RS-232 8-pin RJ45

USB Interface

  • Storage Port: USB Type A (for ABC-02 only)

LED Interface

  • LED Indicators: PWR, WLAN, SYSTEM

Input/Output Interface

  • Buttons: Reset button

Physical Characteristics

  • Housing: Metal
  • IP Rating: IP30
  • Dimensions: 60 x 100 x 34.2 mm (2.36 x 3.94 x 1.35 in)
  • Weight: 330 g (0.73 lb)
  • Installation: DIN-rail mounting Wall mounting (with optional kit)

Power Parameters

  • Input Current: 9 to 30 VDC, 1.57 to 0.47 A
  • Input Voltage: 9 to 30 VDC
  • Power Connector: 1 removable 3-contact terminal block(s)
  • Power Consumption: 14 W (max.)

Environmental Limits

  • Operating Temperature: -25 to 60°C (-13 to 140°F)
  • Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
  • Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

  • EMC: EN 61000-6-2/-6-4 EN 55032/35
  • EMI: CISPR 32, FCC Part 15B Class A
  • EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V/m IEC 61000-4-8 PFMF: 30 A/m
  • Road Vehicles: E mark E1
  • Medical: IEC 60601
  • Safety: IEC 62368-1 UL 62368-1
  • Cybersecurity: EN 18031-1
  • Vibration: IEC 60068-2-6
  • Radio: EN 300 328, EN 301 489-1/17, EN 301 893, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC

MTBF

  • Time: 4,002,106 hrs
  • Standards: Telcordia Standard SR-332

Warranty

  • Warranty Period: 5 years
  • Details: See www.moxa.com/warranty

Available Models

Model No. Description Quantity
AWK-1161C-UN Industrial Wi-Fi 6 (802.11ax) wireless client with 1 10/100/1000BaseT(X) port, IP30, UN band, -25 to 60°C operating temperature
AWK-1161C-UN-T Industrial Wi-Fi 6 (802.11ax) wireless client with 1 10/100/1000BaseT(X) port, IP30, UN band, -40 to 75°C operating temperature
AWK-1161C-US Industrial Wi-Fi 6 (802.11ax) wireless client with 1 10/100/1000BaseT(X) port, IP30, US band, -25 to 60°C operating temperature
AWK-1161C-US-T Industrial Wi-Fi 6 (802.11ax) wireless client with 1 10/100/1000BaseT(X) port, IP30, US band, -40 to 75°C operating temperature