IMC-P21A-G2 SERIES
PoE+ industrial 10/100Base-T(X) to 100Base-FX media converter, multi-mode port with SC connector, -10 to 60°C operating temperature
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standard compliance
Up to 36 W output on the PoE+ port
Supports store-and-forward mode and pass-through mode
-10 to 60°C operating temperature range
Redundant dual DC power inputs
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standard compliance
Up to 36 W output on the PoE+ port
Supports store-and-forward mode and pass-through mode
-10 to 60°C operating temperature range
Redundant dual DC power inputs
Ethernet Interface
- 100BaseFX Ports (multi-mode SC connector): 1
- PoE Ports (10/100BaseT(X), RJ45 connector): 1
- Optical Fiber: Read more
- Optical Fiber: Fiber Module Optical Interface
- Optical Fiber: Multi-mode
- Optical Fiber: Single-mode
- Optical Fiber: Fiber Data Rate
- Optical Fiber: 100Base-FX
- Optical Fiber: Fiber Cable Requirements
- Optical Fiber: 62.5/125 µm
- Optical Fiber: 50/125 µm
- Optical Fiber: 9/125 µm
- Optical Fiber: OM1
- Optical Fiber: OM2/OM3/OM4
- Optical Fiber: OS2 (G.652)
- Optical Fiber: Typical Distance
- Optical Fiber: 2 km
- Optical Fiber: 5 km
- Optical Fiber: 40 km
- Optical Fiber: Wavelength
- Optical Fiber: Typical (nm)
- Optical Fiber: 1310
- Optical Fiber: TX Range (nm)
- Optical Fiber: 1260 to 1360
- Optical Fiber: 1280 to 1340
- Optical Fiber: RX Range (nm)
- Optical Fiber: 1100 to 1600
- Optical Fiber: 1100 to 1600
- Optical Fiber: Optical Power
- Optical Fiber: TX Range (dbm)
- Optical Fiber: -10 to -20
- Optical Fiber: 0 to -5
- Optical Fiber: RX Range (dbm)
- Optical Fiber: -3 to -32
- Optical Fiber: -3 to -34
- Optical Fiber: Link Budget (dB)
- Optical Fiber: 12
- Optical Fiber: 29
- Optical Fiber: Dispersion Penalty (dB)
- Optical Fiber: 3
- Optical Fiber: 1
- Optical Fiber: Note: 1. When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.2. Compute the “Typical Distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).3. An OS1 cable can be used for single-mode models. However, an OS2 cable is required to achieve a transmission distance of 40 km.
- Magnetic Isolation Protection: 1.5 kV (built-in)
Power Parameters
- Input Voltage: 44 to 57 VDC PoE+ output: > 52 VDC recommendedPoE output: > 44 VDC recommended
- Power Consumption: Max 828 mA
- Overload Current Protection: Supported
Physical Characteristics
- Housing: Metal
- IP Rating: IP40 (with I/O modules attached)
- Dimensions: 90 x 73 x 20.3 mm (3.54 x 2.87 x 0.79 in)
- Weight: Product Only: 212 g (0.47 lb)
- Installation: DIN-rail mounting
Environmental Limits
- Operating Temperature: -10 to 60°C (14 to 140°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz; Signal: 10 V IEC 61000-4-8 PFMF
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6 IEC 60068-2-64
- Freefall: ISTA 1A
MTBF
- Time: 6,708,861 hrs
- Standards: Telcordia SR332
Warranty
- Warranty Period: 5 years
- Details: See www.moxa.com/warranty