NPORT IA5000-G2 SERIES
2nd Gen 4-port RS-232/422/485 DIN-rail serial device server with 2 RJ45 ports, -10 to 60°C operating temperature
30 seconds to complete classic Real COM mode settings with DSU-G2
2 Ethernet ports with the same IP or dual IP addresses for network redundancy
Cascading Ethernet ports for easy wiring
Supports nonstandard baudrates with high precision
Data encryption with secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal
One-click diagnostics for easy troubleshooting
Embedded traffic monitoring for advanced data analysis
10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector), and 100Base SFP
DNV, CID2, ATEX Zone 2, and IECEx certified
Compliance with IEC 62443-4-2 Security Level 2 requirements
2 Ethernet ports with the same IP or dual IP addresses for network redundancy
Cascading Ethernet ports for easy wiring
Supports nonstandard baudrates with high precision
Data encryption with secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal
One-click diagnostics for easy troubleshooting
Embedded traffic monitoring for advanced data analysis
10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector), and 100Base SFP
DNV, CID2, ATEX Zone 2, and IECEx certified
Compliance with IEC 62443-4-2 Security Level 2 requirements
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector): NPort IA5150-S-SC-G2/M-SC-G2/M-ST-G2 models: 1NPort IA5000-G2 models: 2 Auto MDI/MDI-X connection
- Magnetic Isolation Protection: 1.5 kV (built-in)
- Optical Fiber: Read more
- Optical Fiber: 100BaseFX
- Optical Fiber: Multi-Mode
- Optical Fiber: Single-Mode
- Optical Fiber: Fiber Cable Type
- Optical Fiber: OM1
- Optical Fiber: 50/125 µm
- Optical Fiber: G.652
- Optical Fiber: 800 MHz x km
- Optical Fiber: Typical Distance
- Optical Fiber: 4 km
- Optical Fiber: 5 km
- Optical Fiber: 40 km
- Optical Fiber: Wavelength
- Optical Fiber: Typical (nm)
- Optical Fiber: 1300
- Optical Fiber: 1310
- Optical Fiber: TX Range (nm)
- Optical Fiber: 1260 to 1360
- Optical Fiber: 1280 to 1340
- Optical Fiber: RX Range (nm)
- Optical Fiber: 1100 to 1600
- Optical Fiber: 1100 to 1600
- Optical Fiber: Optical Power
- Optical Fiber: TX Range (dBm)
- Optical Fiber: -10 to -20
- Optical Fiber: 0 to -5
- Optical Fiber: RX Range (dBm)
- Optical Fiber: -3 to -32
- Optical Fiber: -3 to -34
- Optical Fiber: Link Budget (dB)
- Optical Fiber: 12
- Optical Fiber: 29
- Optical Fiber: Dispersion Penalty (dB)
- Optical Fiber: 3
- Optical Fiber: 1
- Optical Fiber: Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
Ethernet Software Features
- Configuration Options: Web Console (HTTP/HTTPS) Device Search Utility (DSU) MCC Tool Serial Console
- Management: ARP, DHCP Client, DNS, HTTPS, ICMP, IPv4, MDNS, LLDP, SMTP, SMTPS, SNMPv1/v2c/v3, TCP/IP, UDP, SNTP, WINS
- Windows Real COM Drivers: Windows 11, 10, 8.1, 8, 7, Vista, XP, ME, 98, and 95Windows Server 2022, 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003, 2000, and NT
- Linux Real TTY Drivers: Kernel versions: 6.x, 5.x, and 4.x
- Fixed TTY Drivers: macOS versions: 14, 13, 12, and 11
- Arm®-based Platform Support: Windows 11Linux kernels 6.x, 5.x, and 4.xmacOS 14, 13, 12, and 11
- Virtual Machine: VMWare ESXi (Windows 11/10/8.1/8/7 & Linux 6.x, 5.x, and 4.x)VMware Fusion (Windows on macOS 14, 13, 12, and 11)Parallels Desktop (Windows on macOS 14, 13, 12, and 11)
- Android API: Android 3.1.x and later
- Time Management: SNTP Client
- Filter: IGMP v1/v2
- MIB: RFC1213, RFC1317 Private MIB
Security Functions
- Root of Trust: Secure Boot True Random Number Generator (TRNG)
- Authentication: Local database
- Encryption: HTTPS: ECC-256, ECC-384, ECC-521, RSA-1024, RSA-2048, RSA-3072, RSA-4096, AES-128, AES-256, SHA-256, SHA-384, HMACSSH: ECC-256, ECC-384, ECC-521, RSA-2048, AES-128, AES-256, SHA-256, SHA-384, HMACSNMPv3: AES-128, SHA-256, SHA-384Secure OP mode: HTTPS: ECC-256, ECC-384, ECC-521, RSA-1024, RSA-2048, RSA-3072, RSA-4096, AES-128, AES-256, SHA-256, SHA-384, HMACConfig file import/export: AES-256, SHA-256, HMAC
- Security Protocols: HTTPS (TLS 1.2) SNMPv3 SSHv2
Serial Interface
- No. of Ports: NPort IA5150-G2 models: 1 NPort IA5250-G2 models: 2 NPort IA5450-G2 models: 4
- Connector: NPort IA5150-G2 models: 1 x DB9 male NPort IA5250-G2 models: 2 x DB9 male NPort IA5250-TB-G2 models: 2 x 5-pin terminal block NPort IA5450-G2 models: 4 x DB9 male NPort IA5450-TB-G2 models: 4 x 5-pin terminal block
- Serial Standards: RS-232/422/485 (software-selectable)
- Standard Operation Modes: Real COM, TCP Server, TCP Client, UDP, Reverse Terminal, RFC2217, Pair Connection, Disabled
- Secure Operation Modes: Secure Real COM, Secure TCP Server, Secure TCP Client, Reverse SSH, Secure Pair Connection
- Bitrate: 50 bps to 921.6 kbps (supports non-standard baudrates)
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: None, Even, Odd, Space, Mark
- Flow Control: None, RTS/CTS, DTR/DSR, RTS Toggle, XON/XOFF
- RS-485 Data Direction Control: ADDC (automatic data direction control)
- Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms (software–configurable)
- Terminator for RS-485: 120 ohms (software–configurable)
- Isolation: I models: 2 kV
Serial Signals
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w: Data+, Data-, GND
Power Parameters
- Input Voltage: 12 to 48 VDC
- Input Current: NPort IA5150-G2/IA5250-G2 models: 12 to 48 VDC, 452 mA (max.)NPort IA5450-G2 models: 12 to 48 VDC, 583 mA (max.)
- Power Consumption: NPort IA5150-G2/IA5250-G2 models:Room temperature (25°C): 12 to 48 VDC, 377 mA (max.)Room temperature (75°C): 12 to 48 VDC, 452 mA (max.)NPort IA5450-G2 models:Room temperature (25°C): 12 to 48 VDC, 478 mA (max.)Room temperature (75°C): 12 to 48 VDC, 583 mA (max.)
- Power Connector: 8-pin terminal block (V1+, V1-, NO, NC, GND, V2+, V2-, SG)
Relays
- Contact Current Rating: Resistive load: 1 A @ 30 VAC
Physical Characteristics
- Housing: Metal
- IP Rating: IP30
- Dimensions: NPort IA5150-G2/IA5250-G2 models: 25 x 89 x 129 mm (0.98 x 3.5 x 5.07 in) NPort IA5450-G2 models: 42 x 89 x 129 mm (1.65 x 3.5 x 5.07 in)
- Weight: NPort IA5150-G2 models: 384 g (0.85 lb)NPort IA5250-G2 models: 394 g (0.87 lb)NPort IA5450-G2 models: 512 g (1.13 lb)
Environmental Limits
- Operating Temperature: Standard models: -10 to 60°C (14 to 140°F) Wide temp. models: -40 to 75°C (-40 to 167°F)
- Storage Temperature: -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 2 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV, Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF IEC 61000-4-11
- Hazardous Locations: ATEX, Class I Division 2, IECEx
- Maritime: DNV
- Maritime: Certified with 24 VDC power input
- Safety: IEC 62368-1 UL 62368-1 EN 62368-1
- Vibration: IEC 60068-2-6 IEC 60068-2-64
- Freefall: IEC 60068-2-6 IEC 60068-2-32 IEC 60068-2-34
Declaration
- Green Product: RoHS, CRoHS, WEEE
MTBF
- Time: NPort IA5150-G2(-T): 3,238,923 hrsNPort IA5150I-G2(-T): 3,156,944 hrsNPort IA5150-SFP-G2(-T): 3,109,327 hrsNPort IA5250-TB-G2(-T): 2,943,248 hrsNPort IA5250-G2(-T): 2,931,934 hrsNPort IA5150-S/M-SC-G2(-T): 2,889,487 hrsNPort IA5250I-TB-G2(-T): 2,809,979 hrsNPort IA5250I-G2(-T): 2,799,662 hrsNPort IA5450-TB-G2(-T): 2,377,791 hrsNPort IA5450-G2(-T): 2,363,042 hrsNPort IA5450I-TB-G2(-T): 2,208,607 hrsNPort IA5450I-G2(-T): 2,195,874 hrs
- Standards: Telcordia Standard SR-332
Warranty
- Warranty Period: 5 years
- Details: See www.moxa.com/warranty