Technolec

Supports multiple IT/OT protocols for seamless communication between SCADA, Plant Information System, and cloud applications
Tool-free hardware installation and hot-swap design for maximizing operation efficiency
Fully modular design for maximum deployment flexibility
Turbo Ring, Turbo Chain, and RSTP/STP for network redundancy

Ethernet Interface

• 10/100/1000BaseT(X) Ports (RJ45 connector): 8 Auto MDI/MDI-X connection Auto negotiation speed Full/Half duplex mode
• 100/1000BaseSFP Slots: 2
• Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for flow control IEEE 802.3ad for Port Trunk with LACP IEEE 802.1Q for VLAN Tagging IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1X for authentication

Ethernet Software Features

• Management: IPv4/IPv6 Flow control Back Pressure Flow Control DHCP Server/Client ARP RARP LLDP Port Mirroring Linkup Delay SMTP SNMP Trap SNMP Inform SNMPv1/v2c/v3 RMON TFTP SFTP HTTP HTTPS Telnet Syslog Private MIB Fiber check
• Filter: GMRP GVRP GARP 802.1Q VLAN IGMP Snooping v1/v2/v3 IGMP Querier
• Redundancy Protocols: STP RSTP Turbo Ring v2 Turbo Chain Ring Coupling Dual Homing Link Aggregation
• Security: Broadcast storm protection Rate Limit Trust access control Static Port Lock Sticky MAC HTTPS/SSL SSH RADIUS TACACS+ Login and Password Policy
• Time Management: SNTP NTP Server/Client NTP Authentication
• Protocols: IPv4/IPv6 TCP/IP UDP ICMP ARP RARP TFTP DNS NTP Client DHCP Server DHCP Client 802.1X QoS HTTPS HTTP Telnet SMTP SNMPv1/v2c/v3 RMON Syslog
• MIB: P-BRIDGE MIB Q-BRIDGE MIB IEEE8021-SPANNING-TREE-MIB IEEE8021-PAE-MIB IEEE8023-LAG-MIB LLDP-EXT-DOT1-MIB LLDP-EXT-DOT3-MIB SNMPv2-MIB RMON MIB Groups 1, 2, 3, 9

Switch Properties

• MAC Table Size: 16 K
• Jumbo Frame Size: 9.216 KB
• Max. No. of VLANs: 256
• VLAN ID Range: VID 1 to 4094
• IGMP Groups: 512
• Priority Queues: 4
• Packet Buffer Size: 1 MB

Serial Interface

• Console Port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

Input/Output Interface

• Buttons: Reset button
• USB Ports: USB 2.0 Type A (only supports Moxa's ABC-02-USB backup and storage device)

Power Parameters

• Input Current: 0.9 A @ 12 VDC

Physical Characteristics

• Housing: Plastic
• Dimensions: 42 x 177 x 131.5 mm (1.65 x 6.97 x 5.18 in)
• Weight: 660 g (1.46 lb)
• Installation: DIN-rail mounting Rack mounting (with optional kit)

Environmental Limits

• Operating Temperature: -40 to 75°C (-40 to 167°F) (with SFP module installed) Note: Proper airflow is required in an environment with temperature > 65°C
• Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
• Ambient Relative Humidity: 5 to 95% (non-condensing)
• Altitude: 2000 m
• Altitude: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Standards and Certifications

• EMC: EN 55032/35 EN 61000-6-2/-6-4
• EMI: CISPR 32, FCC Part 15B Class A
• EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: (DC) 1 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: (DC) 0.5 kV L-N, 1 kV L/N-PE; Signal: 1 kV; IO: 0.5 kV IEC 61000-4-6 CS: Power: Power: (DC) 10 V; Signal: 10 Vrms IEC 61000-4-8 PFMF: 30 A/m
• Safety: UL 61010-2-201 UL 61010-1
• Shock: IEC 60068-2-27 Half sine wave; acceleration: 15 g; time: 11 ms
• Vibration: IEC 60068-2-6 DIN-rail mounted:7 mm peak-peak (p-p) (2 to 8.42 Hz), 1 g (8.42 to 150 Hz)Rack mounted (with optional kit):7 mm peak-peak (p-p) (2 to 8.42 Hz), 0.5 g (8.42 to 150 Hz)
• Package Vibration Test: ISTA 1A
• Package Drop Test: ISTA 1A

MTBF

• Time: 3,104,403 hrs
• Standards: Telcordia Standard SR-332

Warranty

• Warranty Period: 5 years
• Details: See www.moxa.com/warranty

Available Models

Model No.	Description	Quantity
65M-5011M-CT-T	ioPAC 6500 L2 managed switch module with 2 100/1000 fiber ports, 8 10/100/1000 Ethernet ports, -40 to 75°C operating temperature, conformal coating